facebook icon twitter youtube

EHS 3001 Introduction and Orientation to OSHA

This safety training course provides a basic overview of OSHA's role in the prevention and elimination of work‐related illnesses and injuries. It includes information about employer and employee rights and responsibilities, and a very brief look at the inspection process, reporting and recordkeeping. This course includes information on the Occupational Safety and Health Act to include: The General Duty Clause, Employer and Employee Rights and Responsibilities, Whistleblower Rights, Recordkeeping basics, Workplace Inspections, Citations, and Penalties. The employee will also learn how to find or look up safety standards, General Safety and Health Provisions, Competent Person, Subpart C, and other OSHA resources.



EHS 1002 Walking and Working Surfaces

This safety training course provides information that helps employees avoid injury from slips, trips, and falls. Slips, trips, and falls constitute the majority of general industry accidents. They cause 15% of all accidental deaths, and are second only to motor vehicles as a cause of fatalities.



EHS 1003 Exit Routes, Emergency Action, Fire Prevention, and Fire Protection

This course prepares employees to understand and prepare for workplace safety for fire protection and prevention, maintaining safe exit routes, and preparation for other emergencies.



EHS 1004 Electrical Safety

This Electrical Safety training is designed for the general employee and is a comprehensive look at electrical hazards. The goal of this course is to raise awareness and help prevent common electrical injuries.



EHS 1005 Personal Protective Equipment [PPE]

This PPE training course informs employees how and when to use many types of personal protective equipment. They will also learn about head protection, hand protection, body protection and foot protection.



EHS 1006 Hazard Communication

This course teaches employee how to identify hazardous materials, read labels, use MSDS, and identify hazards by category.It thoroughly teaches safe work practices when handling hazardous materials and how to store them properly. Proper emergency response procedures are also covered in the hazard communication training course.



EHS 1013 Machine Guarding

This course emphasizes important rules to follow for safety when working with moving machine parts that have the potential for causing severe workplace injuries, such as crushed fingers or hands, amputations, burns or blindness, just to name a few. Learning these safeguards are essential for protecting employees from these injuries.



EHS 1015 Bloodborne Pathogens

This course is designed for individuals who may be exposed to blood and body fluids during the performance of their work and who require a basic understanding of bloodborne pathogens, prevention of occupational exposure, and exposure follow-up.



EHS 1016 Ergonomics

This course encompasses safety practices to reduce risk factors known to contribute to occupational ergonomic injuries and illness, such as sprains and strains and cumulative trauma disorders. These injuries are the fastest growing categories of workplace injuries and are often caused by repetitive motion and stress.



EHS 1021 Workplace Violence "Active Shooter Safety Training"

This course presents information on safety practices that provides the individual with critical guidance on how to recognize and survive workplace violence including an active shooter situation. This course encompasses ways to help prevent, and handle violence in the workplace.



EHS 1033 Ladder & Fall Protection Safety Training

This course provides information on the hazards associated with the use of ladders. Ladders are one of the most commonly used pieces of equipment in almost any work environment. From common stepladders to sophisticated extension ladders, they can be found almost everywhere. This course teaches how to properly inspect and use ladders safely.



EHS 1036 Emergency Response Safety Training

This course provides information on the hazards associated with emergency situations. During this course, participants will review emergency response plans that cover several critical incident topics with an emphasis on hurricane preparation and emergency communications.



EHS 1038 Golf Cart / Utility Vehicle Operator Safety Training

During this course, participants will learn to prevent injury to pedestrians, cart operators and their passengers. This course reviews requirements for safe operating procedures, laws, and operator and supervisor accountability. Individuals will learn to utilize load principles of balance, stability, and capacity and how to identify safety concerns associated with golf cart and utility vehicle operations.



EHS 1024 Aerial Lift Vehicle Safety Training

This Training Program is intended to reduce employee hazards and overall risk of injuries by reviewing correct safety practices in the selection, use and set-up of aerial lifts. Individuals will learn how to identify safety concerns associated with aerial lift vehicle operations.



EHS 1011 Hazardous Materials

This course is an overview of OSHA rules and regulations set in place to prevent hazards from hazardous materials which are considered any substance or compound that has a capability of producing adverse effects on the health and safety of humans.



EHS 1012 Materials Handling

This course emphasizes important rules to follow for safe material handling at any workplace. This course’s principle is to show workers how to assess a load for safe handling, how to recognize when a load is hazardous, be aware of pinch points, and how to use proper personal protective equipment.



EHS 1014 Introduction to Industrial Hygiene

This course introduces industrial hygiene safety principles including: the recognition, the evaluation and the control of hazards in the work environment. This course reviews exposure guidelines for chemical, biological, and physical hazards.



EHS 1017 Safety and Health Program

This course encompasses safety practices to recognize workplace hazard identification, avoidance, and control. These practices help instill a safety culture that reduces accidents for employees and promote a safe work environment.



EHS 1022 Permit-Required Confined Spaces

This course provides information on the hazards associated with confined spaces and will provide employees direction on the proper procedures for entrants and attendants as well as proper rescue procedures associated to confined spaces.



EHS 1023 Lockout / Tagout

This course encompasses safety practices that gives authorized, affected, and other employees the critical information they need to help prevent injuries to employees working with both electric and hydraulic/pneumatic equipment and points out specifically where Lock-Out/Tag-Out procedures should be applied.



EHS 1025 Powered Vehicles / Fork Lift Safety Training and Operators Safety Test

This course provides participants a general understanding of the safe and efficient operation of an industrial powered fork trucks. Employees will learn how to identify specific health and safety hazards in the workplace associated with operating a powered industrial lift truck. To conclude this training, participants must complete the Operators Safety Test.



EHS 1031 CPR and AED Safety Training

This CPR and AED program teaches the principles of basic life support for adults. It gives you the latest guidelines for CPR and emergency cardiac care, starting with how to assess the scene of an emergency and take stock of the victim's condition. The course details how to perform one-rescuer CPR and rescue breathing, and how to manage choking in a conscious person. It also addresses infection control.



EHS 1034 Compressed Gas Safety Training

Compressed gases present a unique hazard. Depending on the particular gas, there is a potential for simultaneous exposure to both mechanical and chemical hazards. This course provides information on the hazards associated with compressed gas and will provide employees direction on the proper procedures for working safely with these hazards.



EHS 1035 Welding, Cutting and Brazing Safety Training

This course provides information on the hazards associated with welding, cutting, and brazing. This work poses unique safety and health risks to employees to include exposure to a wide variety of fumes and chemicals, UV radiation, burns, electrical shock and even death. This training will cover safety practices to reduce these hazards.



EHS 1037 Hand and Power Tools Safety Training

This course encompasses safety practices for tools that are powered by an external source, such as electricity or compressed air. Power tools must receive regular maintenance and be properly handled to avoid injury. This training also covers safety practices for tools that are "powered" by an operator, such as a hammer or screwdriver. Hand tools must be kept clean and sharp in order to avoid injury



EHS 1039 First Aid

This Basic First aid training program teaches how to properly apply first aid skills to save lives and reduce recovery time. This course teaches how to respond to breathing emergencies, identifying and caring for bleeding, sudden illness and injuries and techniques for preventing disease transmission. It also addresses infection control.



EHS 1040 Standard First Aid, CPR, and AED

This course teaches how to respond to breathing and cardiac emergencies in adults, identifying and caring for bleeding, sudden illness and injury and preventing disease transmission.



EHS 1041 CPR and AED Refresher

Designed for those who have previously taken a National Safety Council CPR and AED course, this course reviews CPR and AED techniques as well as basic choking aid for lay rescuers.



EHS 3002 Workplace Emergency Action Preparation Exit Routes, Fire Prevention and Protection Advance Safety Training

During this course, participants will gain an in-depth review of workplace emergency protocol. This course encompasses safety awareness for emergency communications, critical incident response, hurricane preparation, fire safety, and evacuations.



EHS 3003 Electrical Advance Safety Training

During this course, participants will learn to recognize the hazards of electricity. This course encompasses safety practices to avoid or be aware of electrical blast, electrocution, short circuits, overloads, ground faults, and electrical fires. All persons who install, maintain, repair, or just work near electrical powered equipment will benefit from electrical safety training.



EHS 3004 Materials Handling Advance Safety Training

During this course, participants will learn how to recognize the hazards associated with the moving, handling and storage of materials. This course will review in-depth safety practices that when applied and followed will reduce hazards and risk while handling materials.



EHS 2010 OSHA 10-hour Construction training course - Module A

The OSHA 10-hour Construction training course is designed for construction workers, foremen, job supervisors, safety coordinators, and anyone else involved in construction. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Upon successful completion of this OSHA training course, participants will receive an OSHA construction safety and health 10-hour course completion card from the Department of Labor. Topics Covered in this course: Introduction to OSHA, General Safety and Health Provisions, Electrical Standards, Fall Protection Awareness, Personal Protective Equipment, Materials Handling, Material Storage Use and Disposal, Hand and Power Tools, Scaffolds and Scaffolding, Cranes/Derricks/Hoists, Elevators and Conveyors, Excavations, Stairways/Ladders. To earn the 10-hour OSHA card all 5 modules must be taken (A,B,C,D, & E).



EHS 2011 OSHA 10-hour Construction training course - Module B

The OSHA 10-hour Construction training course is designed for construction workers, foremen, job supervisors, safety coordinators, and anyone else involved in construction. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Upon successful completion of this OSHA training course, participants will receive an OSHA construction safety and health 10-hour course completion card from the Department of Labor. Topics Covered in this course: Introduction to OSHA, General Safety and Health Provisions, Electrical Standards, Fall Protection Awareness, Personal Protective Equipment, Materials Handling, Material Storage Use and Disposal, Hand and Power Tools, Scaffolds and Scaffolding, Cranes/Derricks/Hoists, Elevators and Conveyors, Excavations, Stairways/Ladders. To earn the 10-hour OSHA card, all 5 modules must be taken (A,B,C,D, & E).



EHS 2012 OSHA 10-hour Construction training course - Module C

The OSHA 10-hour Construction training course is designed for construction workers, foremen, job supervisors, safety coordinators, and anyone else involved in construction. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Upon successful completion of this OSHA training course, participants will receive an OSHA construction safety and health 10-hour course completion card from the Department of Labor. Topics Covered in this course: Introduction to OSHA, General Safety and Health Provisions, Electrical Standards, Fall Protection Awareness, Personal Protective Equipment, Materials Handling, Material Storage Use and Disposal, Hand and Power Tools, Scaffolds and Scaffolding, Cranes/Derricks/Hoists, Elevators and Conveyors, Excavations, Stairways/Ladders. To earn the 10-hour OSHA card, all 5 modules must be taken (A,B,C,D, & E).



EHS 2013 OSHA 10-hour Construction training course - Module D

The OSHA 10-hour Construction training course is designed for construction workers, foremen, job supervisors, safety coordinators, and anyone else involved in construction. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Upon successful completion of this OSHA training course, participants will receive an OSHA construction safety and health 10-hour course completion card from the Department of Labor. Topics Covered in this course: Introduction to OSHA, General Safety and Health Provisions, Electrical Standards, Fall Protection Awareness, Personal Protective Equipment, Materials Handling, Material Storage Use and Disposal, Hand and Power Tools, Scaffolds and Scaffolding, Cranes/Derricks/Hoists, Elevators and Conveyors, Excavations, Stairways/Ladders. To earn the 10-hour OSHA card, all 5 modules must be taken (A,B,C,D, & E).



EHS 2014 OSHA 10-hour Construction training course - Module E

The OSHA 10-hour Construction training course is designed for construction workers, foremen, job supervisors, safety coordinators, and anyone else involved in construction. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Upon successful completion of this OSHA training course, participants will receive an OSHA construction safety and health 10-hour course completion card from the Department of Labor. Topics Covered in this course: Introduction to OSHA, General Safety and Health Provisions, Electrical Standards, Fall Protection Awareness, Personal Protective Equipment, Materials Handling, Material Storage Use and Disposal, Hand and Power Tools, Scaffolds and Scaffolding, Cranes/Derricks/Hoists, Elevators and Conveyors, Excavations, Stairways/Ladders. To earn the 10-hour OSHA card, all 5 modules must be taken (A,B,C,D, & E).



Information

Safety and Transportation
Coastal Carolina University
470 Allied Drive
P.O. BOX 261954
Conway, SC 29528-6054
843-234-3433

Campus Map

Safety Concern?


Report a Safety Concern